Below is a list of the cartridge heater options available for all cartridge heater configurations unless otherwise specified. All products are made in the USA.
Looking for the cartridge heater configurations? Click here.
Ready to Order? Request a Quote by selecting Cartridge Heater from the Select a Product drop-down.
|Option & Description||Option Diagram|
Mounting flanges, made by your specifications, may be brazed to heater at your insertion length. Available with any configuration. Flange material is 1/16" thick.
Threaded fittings provide fast, removable installation into a threaded hole. Silicone potting moisture seals can also be used in conjunction with the threaded fitting option. When ordering, specify brass fitting (Style TFB) or stainless steel fitting (Style TFS), unheated length, and if needed, water-tight.
Distributed wattage concentrates extra heat where it is needed. Useful to compensate for high heat losses along the edges of heated parts. Can have as many zones as watt density allows. When ordering, specify number of zones, zone lengths, and wattage distribution.
For controlled heat zones. May have up to three independent zones. Can be added to Style CL, Style SB, Style SH, and Style SL. (Style CL is pictured.)
For high amp applications. Available on most configurations. Some restrictions apply. Contact Thermal Corporation for more information.
|Internal End Thermocouple|
Style JC or KC
Internal thermocouple junction is located at the end disc to monitor the material flow past the end of the heater. Comes grounded unless specified to be ungrounded. (JC specifies type "J" thermocouple. KC specifies type "K" thermocouple.)
|Internal Sheath Thermocouple|
Style JB or KB
Internal thermocouple junction is located adjacent to the inside heater sheath to monitor the part temperature. Comes grounded unless specified to be ungrounded. (JB specifies type "J" thermocouple. KB specifies type "K" thermocouple.)
Used as a removal method. Offered in most diameters.
|Strain Relief Spring|
Used in conjunction with braid. For applications with lead movement. Offered in most diameters.
Can be attached to most configurations. Please specify your plug when ordering.
May be added to most configurations.
Used as a removal method. Can be added to all configurations.
*Discounts may apply. Call for Discounts Based on Order Quantity.
Written by Shelby Reece
Date Published: 03.26.2019
Last Updated: 03.11.2020